Acoustic Revive 1.0SP USB cable

 

The new and most unusual USB cable is now on demo here at mundoaudiofilo

Some high-end USB cables made by audio cable manufacturers have independently shielded signal line and power lines, however, these two lines are in close proximity in the same cable and it is impossible to avoid influence from the power line to signal line.
In addition, this structure is constantly causing noise reflections inside the outer shielding tube which will significantly damage sound quality.
USB-1.0SP and USB-1.0PL are equipped with two independent cables consisting of a two-core shielding structure with a 100% shielding effect obtained by using a copper foil. This is the only USB cable which is successful in stopping noise interaction between the power and signal lines.

Acoustic revive obtain further improvements in sound quality by employing two A-Plugs to separate the Signal and power lines from the output terminals.   USB-1.0SP employs two A-Plugs for the output side to achieve perfect separation of the signal line and power supply line. A P/C is normally equipped with several USB outlets conveying the same signals, therefore, you can bring out the Signal and Power lines separately from the output, resulting in a dramatic improvement in sound quality, channel separation and S/N ratio

USB-1.0SP and USB-1.0PL USB cables are 100% Made in Japan and are equipped with a very thick 0.8_ Solid single-core PCOCC-A conductor (the highest diameter USB cable currently available on the market) to achieve an overwhelming D range and F range that was impossible to create by conventional USB cables.

Click here for pricing details